Main sheet traveller

Step one of making my own main sheet traveler.  Obviously, there is a rail in place, but rather than spend a few hundred euros on a main sheet traveler system I decided to add a couple of blocks and some cam cleats to make my own. As is the way of things in Cyprus I could not go into a chandler and get all the parts I needed, but I have made a start. I'm going to use 5mm line and some Barton 5mm blocks with a safe working load of 350kg. It amazes me that these small blocks have such a high SWL.

Location: Larnaca, Cyprus

Comments

Post a Comment

Popular posts from this blog

Wind…

Image
Wind at last… we (Sheila, Katie, Elizabeth and me) went out for a brief sail yesterday and there was wind. Sheila remarked how different the helm felt with wind. The Kingfisher has a relatively large rudder so even very small movements make a significant difference to the direction. About 5 nautical miles sailed. Not far but good to be out on the water. And still relatively warm. What was surprising to us was that since it was glorious sailing weather and the previous weekend almost no wind at all… there were almost no sailing boats out sailing (I counted 3 others, and none when we started.)
Read more

What no wind again?

Image
 So time to chill out after a lot of work… in other words time for a sail. 09:30 we put the new straps on the bimini (yes, this works really well now) and motored out of the marina and put up the sails. Wow… we're sailing along at 0.9 knots… then 1.1 knots… trim the sails and we're speeding along at maybe 2.1 knots. And it looks like it's race day for the local sailing club. A dozen boats on the water all trying to get the speed they need to beat the others. And then the wind dies. Well… it does where we are, about a mile or two out from the shore. Along the shore they are still trying to race and going nowhere.  So what to do when you're going nowhere? Get out the paddles for the dinghy and paddle! And it's the first of December… …and it's hot enough to be in a shirt and no sweater! Even me!
Read more

Christmas boat & maintenance

Image
15th November 2022 I had a phone call from the marina asking me to come down to discuss something. Initially that worried me as I thought there must be something wrong with Liza . They assured me there wasn't and when I got there the marina operations director asked if they could use Liza as the 'Christmas boat'. So…  21st November 2022 Liza was lifted out of the water 1 week later! I had been intending lifting her to do bi-annual maintenance in the spring, so that was brought forward. There was very little growth on the hull. A little on the bottom of the keels but for two years in the water I was very pleased with how little there was. Probably because I sail her a lot so there is regular water movement.  Then she was moved round to the entrance to the new marina village where there are sheds with food and other shops and a large Christmas tree in the middle. Apparently having a lit up Christmas boat is a Greek island tradition and this was to be started now in Cyprus i
Read more